User Application:This extender is great for legacy devices with a VGA output and
RS-232 control, such as projectors and other video applications.
Extends VGA and RS-232 over a single CAT-5 cable
The VGA Extender with RS-232 extends a VGA computer video and RS-232 up to 330 feet over just one CAT5 cable. The Sender hooks up to the computer or other VGA source and the Receiver connects to your display. The RS-232 extension is useful in controlling the functions your display remotely, such as turning it on and off, and selecting between inputs.
By choosing widely available CAT5e cable for extension, Gefen has made installation simple and flexible. The CAT5e cable can be tucked under carpet or run above a ceiling.
How It Works
The VGA RS232 Extender sender unit connects to your source using the supplied VGA and RS-232 cables. The receiver unit connects to your display and your Serial (RS-232) device - up to 330 feet away. Connect the sender and the receiver to each other using a single CAT-5 cable.
Extends VGA and RS-232 up to 330 feet (100 meters) over one CAT-5 cable
Supports resolutions up to 1920 x 1200
Trim pot and Dip switches for fine video adjustment
Supports RS-232 pins 2 (Rx), 3 (Tx), and 5 (Ground) up to 19,200 bits per second
Useful for Digital Signage Applications
Video Amplifier Bandwidth: 350 MHz
Input Video Signal: 1.2V p-p
Input Sync Signal: 5V p-p (TTL)
Horizontal Frequency Range: 15 - 70 kHz
Vertical Frequency Range: 30 - 170 Hz
Video Input Connector (Sender): (1) VGA HD-15, male
Video Output Connector (Receiver): (1) VGA HD-15, female
RS-232 Input Connector (Sender): (1) DB-9, female
RS-232 Output Connector (Receiver): (1) DB-9, male
Link Connectors (Sender / Receiver): (1) RJ-45, Shielded