Description
4K Ultra HD 8×9 Matrix for HDMI w/ HDCP 2.2, HDBaseT 2.0, and POH
The Gefen 4K Ultra HD 8×9 Matrix for HDMI w/ HDCP 2.2, HDBaseT 2.0, and POH routes eight 4K sources to any combination of nine 4K displays. It features eight HDMI inputs, one HDMI output for local viewing/monitoring, and eight HDBaseT™ 2.0 outputs. The matrix comes in a rack-mountable enclosure with detachable rack-ears for shelf-top placement. Low profile, surface-mountable Receiver units fit in tight places and accommodate Gefen locking HDMI cables for secure connections.
HDBaseT Support
The HDBaseT™ 2.0 outputs extend AV and controls up to 100m at 4K to eight receivers installed at remote viewing locations. Gefen’s implementation of the new HDBaseT 2.0 Colligo™ platform ensures an even more robust and resilient connection than the industry standard HDBaseT™. HDBaseT™ extension between the matrix and the eight included receivers supports HDMI, 2-way IR, RS-232, and Ethernet. IR from viewing locations to the sources can be routed independent from video if need be. POH (Power Over HDBaseT™) technology provides power to the receiver units and other POH-class-compliant devices, using the same CAT-5 cable that extends the HDMI and control signals.
Video Support
Resolutions up to 4K Cinema-DCI (4096 x 2160 at 24 or 30 Hz 4:4:4) and 4K Ultra HD (3860 x 2160 at 60 Hz, 4:2:0 or 30Hz 4:4:4) are supported. The Gefen 8×9 Matrix also supports 1080p Full HD, 1920 x 1200 (WUXGA), 3DTV, and Deep Color (up to 1080p resolution)and is compliant with the latest HDCP 2.2 protocol as well as HDCP 1.4.
Audio Support
The GEF-UHD-89-HBT2 supports Stereo and Multichannel digital audio including 7.1 channels of LPCM as well as High Bit Rate (HBR) digital audio formats such as Dolby® TrueHD and DTS-HD Master Audio.
Syner-G™ Support
The Gefen Syner-G™ software’s Discovery and Show-Me features simplify initial IP configuration. This matrix can be controlled via front panel buttons, a handheld IR remote, electrical IR, RS-232, Telnet, UDP, and Gefen’s intuitive and user-friendly web server interface. An easy-to-read, super-bright OLED front panel display indicates routing status and IP settings.
Features
- Routes eight 4K sources to nine displays
- Supports resolutions up to:
- 4K Cinema-DCI (4096 x 2160 at 24 or 30 Hz)
- 4K Ultra HD (3860 x 2160 at 60 Hz, 4:2:0 color space)
- 1080p Full HD
- 1920×1200 WUXGA
- HDCP 2.2 and 1.4 compliant
- Extends:
- HDMI
- Ethernet
- RS-232
- 2-way IR up to 100 meters (330 feet)
- Supports 12-bit Deep Color (up to 1080p Full HD)
- 3D pass-through
- Lip Sync pass-through
- IR from viewing locations to sources can be routed along with or independent from video path
- Push button front panel controls
- Advanced EDID Management for rapid integration of sources and displays
- Pass-through of LPCM 7.1 and HBR (High Bit Rate) audio formats such as:
- Dolby Atmos®
- Dolby® TrueHD
- DTS:X™
- DTS-HD Master Audio™
- Supports the use of DVI sources and DVI displays with HDMI-to-DVI adapters (not included)
- RS-232 Serial interface for use with an automation control system
- IP control via Telnet, UDP, and the built-in web server interface
- IR remote control
- Gefen Syner-G™ software’s Discovery and Show-Me features simplify initial IP configuration
- Field-updatable firmware via web server interface
- Can be placed on a shelf or mounted in a standard 19-inch wide rack
Features and specifications are subject to change without notice.
All trademarks and registered trademarks are properties of their respective owners
Other Specifications
Maximum Pixel Clock:: 300 MHz
Matrix: :
HDMI Input Connectors: : (8) Type A 19-pin female, locking
HDMI Output Connector: : (1) Type A 19-pin female, locking
HDBaseTâ„¢ 2.0 POH Output Connectors: : (8) RJ-45
RS-232 serial port – control: : (1) DB-9, female
RS-232 serial ports – extension: : (8) 3.5mm mini-stereo jack
IR In/Ext Ports – extension: : (9) 3.5mm mini-stereo jack
IR In/Ext Port – control: : (1) 3.5mm mini-stereo jack
IR Out Ports – extension: : (9) 3.5mm mini-mono jack
Ethernet Port – IP Control & extension: : (1) RJ-45
AC Power Inlet: : (1) IEC type
IR Extender type: : EXT-RMT-EXTIRN (not included)
IR Sensor: : (1), located on front panel
Display: : OLED, 2 rows, 20 characters per row
Power Button/Indicator: : (1) tact-type, bi-color blue/orange backlight
Control Buttons/Indicators: : (7) tact-type, blue backlight
Power Supply: : 100V to 240V AC
Rack mounting requirements: : Standard 19″ rack, 2U high
Dimensions (excluding rack ears and connectors, W x H x D): :
17.25″ x 3.5″ x 15.75″ (440mm x 89mm x 400mm)
Net Unit Weight: : 22 lbs. (10.0 kg)
Receiver: :
HDMI Output Connector: : (1) Type A 19-pin female, locking
HDBaseT 2.0 POH Input Connector: : (1) RJ-45
RS-232 serial port – extension: : (1) 3.5mm mini-stereo jack
IR In/Ext Port – extension: : (1) 3.5mm mini-stereo jack
IR Out Port – extension: : (1) 3.5mm mini-mono jack
Ethernet Port – extension: : (1) RJ-45
IR Extender type: : EXT-RMT-EXTIRN (not included)
Dimensions (excluding brackets and connectors, W x H x D): :
3.50″ x 0.65″ x 5.65″ (88mm x 16mm x 143mm)
Net Unit Weight: : 0.6 lbs. (0.25 kg)
System: :
Power Consumption: : 175W
Operating Temperature: : +32 to +122 °F (0 to +50 °C)
Operating Humidity: : 5% to 90% RH, non-condensing
Storage Temperature: : -4 to +140 °F (-20 to +60 °C)
Storage Humidity: : 5% to 95% RH, non-condensing
MTBF: : 50000 hours
Warranty
3 year product warranty
If the product was purchased before March 29, 2017, the warranty duration is 2 years.
Please see the Gefen warranty page for more details
